ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 28
Editing the Connected IP Cameras and Configuring Customized Protocols
After adding IP cameras, the basic camera information is listed. You can configure the basic IP camera settings.
Editing the IP Camera Parameters
Click the icon to edit the parameters; you can edit the IP address, protocol, and other parameters.
Edit the Parameters
• Channel Port
1. If the connected device is an encoding device with multiple channels, you can choose the channel
to connect by selecting the channel port no. in the drop-down list.
2. Click OK to save the settings and exit the editing interface.
Editing the Advanced Parameters
Drag the horizontal scroll bar to the right and click the icon.
Network Configuration of the Camera
You can edit the network information and the camera password.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
To Next Page
Loading...
Need help?
General