HIKVISION ERT-F204 Series - Chapter 13 Others; Configuring General Settings

ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 129
Chapter 13 Others
Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, and mouse pointer speed through the
Menu > Configuration > General interface.
Go to Menu > Configuration > General.
Select the General tab.
General Settings Interface
Configure the following settings:
• Language: The default language used is English.
• Resolution: Configure the VGA resolution and HDMI resolution respectively.
• Time Zone: Select the time zone.
• Date Format: Select the date format.
• System Date: Select the system date.
• System Time: Select the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable Password: Enable/disable the use of the login password.
Click Apply to save the settings.