ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 20
Resetting Your Password
If you forget the admin password, you can reset the password by importing the GUID file. The GUID file must
be exported and saved in the local flash drive after you have activated the device (refer to Chapter 2.1.2
Activating Your Device).
On the user login interface, click Forgot Password to enter the Reset Password interface.
Insert the flash drive containing the GUID file into the DVR before resetting the password.
Reset Password
Select the GUID file from the USB flash drive and click Import to import the file to the device.
If you import the wrong GUID file seven times, you will be not allowed to reset the password for 30
minutes.
After the GUID file is successfully imported, enter the reset password interface to set the new admin
password.
Click OK to set the new password. You can export the new GUID file to the USB flash drive for future
password resetting.
When the new password is set, the original GUID file will be invalid. The new GUID file should be
exported for future password resetting. You can also enter the User > User Management interface
to edit the admin user and export the GUID file.
To Next Page
Loading...
Need help?
General