ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 132
Add User Menu
Enter the information for the new user, including User Name, Admin Password, Password, Confirm, Level,
and User’s MAC Address.
• Password: Set the password for the user account.
We highly recommend that you create a strong password of your own choosing (using a minimum of eight
characters, including at least three of the following categories: upper case letters, lower case letters, numbers,
and special characters) in order to increase the security of your product. We also recommend that you reset
your password regularly. Especially in a high security system, resetting the password monthly or weekly can
better protect your product.
• Level: Set the user level to Operator or Guest. Different user levels have different operating
permission.
• Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
• Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
• User’s MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is configured
and enabled, it only allows the remote user with this MAC address to access the DVR.
Click OK to save the settings and go back to the User Management interface. The added new user will be
displayed on the list, as shown in Figure 1. 2.
To Next Page
Loading...
Need help?
General