ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 137
Admin
You are allowed only to edit the password and MAC address. Check the Change Password checkbox if you
want to change the password, and input the correct old password, and the new password, in the Password
and Confirm text fields.
We highly recommend that you create a strong password of your own choosing (using a
minimum of eight characters, including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product. We also
recommend that you reset your password regularly. Especially in a high security system, resetting the
password monthly or weekly can better protect your product.
Edit the unlock pattern for the admin user account.
1) Check the Enable Unlock Pattern checkbox to enable the use of an unlock pattern when logging in to
the device.
2) Use the mouse to draw a pattern among the nine dots on the screen. Release the mouse when the
pattern is done.
Set Unlock Patter for Admin User
Click of Export GUID to enter the reset password interface to export the GUID file for the admin user
account.
If the admin password is changed, you can re-export the GUID file to the connected flash drive for
the future password resetting.
Click OK to save the settings and exit the menu.
For the Operator or Guest user account, click the button on the user management interface to edit
the permission.
To Next Page
Loading...
Need help?
General