ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 4
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the manufacturer.
Applicable Models
This manual is applicable to the models listed in the following table.
ERT-F2xxx
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Product Key Features
General
• Connectable to network cameras, network dome, and encoders
• Connectable to third-party network cameras via HIK, private RTSP protocols
• Connectable to the smart IP cameras
• PAL/NTSC adaptive video inputs
• Supports H.264+/H.264 video streams
• Each channel supports dual-stream
• Up to two 2 MP network cameras can be connected
• Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
To Next Page
Loading...
Need help?
General