ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 50
• In the message box, choose the day for which you want to set schedule.
Recording Schedule Interface
• Click the icon to set the accurate time of the schedule.
• To schedule an all-day recording, check the All Day checkbox.
Edit Schedule
• To arrange other schedule(s), leave the All Day checkbox blank and set the Start/End time.
Up to eight periods can be configured for each day. Time periods cannot overlap.
Select the record type in the drop-down list.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording and capture, you must configure the motion detection
settings, alarm input settings or VCA settings as well. For detailed information, refer to Chapter 8.1 ,
Chapter 8.2 and Chapter 5.5 .
VCA settings are available only to smart IP cameras.
To Next Page
Loading...
