ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 52
Motion Detection
Configure Motion Detection
• Choose camera you want to configure.
• Check the Enable Motion Detection checkbox.
• Drag and draw the area for motion detection with the mouse. To set motion detection for the entire
area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
By default, Dynamic Analysis for Motion is enabled. When motion detection is triggered, green
frames around the moving targets in the motion detection area will be displayed on the live video.
Motion Detection- Mask
• Click Settings, and the channel information message box pops up.
To Next Page
Loading...
