ERT-F2xxx DVR User Manual
UM ERT-F2xxx 030118NA 68
For configuring the VCA recording, refer to Chapter 5.5 Configuring VCA Event Recording and
Capture; for VCA detection type details, refer to Chapter 9 VCA Alarm.
Select the camera(s) to search, and set the Start time and End time.
Click Search to get the search result information. Refer to the right-side bar for the results.
Select a result item and click to play back the file.
Pre-play and post-play can be configured.
Enter the Synch Playback interface to select the camera(s) for synchronous playback.
Synch Playback Interface
Enter the playback interface. Use the toolbar on the bottom of the playback interface to control playing.
Interface of Playback by Event
Click or to select the previous or next event. Refer to Table 6.1 for the description of buttons on
the toolbar.
To Next Page
Loading...
