4.14 Casters (Beds with Central Brake and Steer)
Chapter 4: Removal, Replacement, and Adjustment Procedures
Century+™ Bed Service Manual (man241) Page 4 - 45
4
4.14 Casters (Beds with Central Brake and Steer)
Tools required: T25 Torx® head screwdriver
Combination wrench set
Socket wrench set
Ratchet drive
5/32" allen wrench
5 mm allen wrench
Removal
1. Using the T25 Torx® head screwdriver, remove the screws (A), and
separate the plastic cover (B) from the caster (see figure 4-14 on page
4-45).
Figure 4-14. Casters (Beds with Central Brake and Steer)
2. Using the 5/32" allen wrench, turn the setscrew (C) counterclockwise, and
relieve the cable tension.
m241_055
To Next Page