Hill-Rom Century+ P1400 - Tool and Supply Requirements

Tool and Supply Requirements
Chapter 6: General Procedures
Century+™ Bed Service Manual (man241) Page 6 - 9
6
Tool and Supply Requirements
The following tools and supplies are required to service the Century+™ Bed:
• Phillips head screwdriver
• T25 Torx® head screwdriver
• 1/4" nut driver
• Ratchet drive
• Socket wrench set
• 1/2" socket and ratchet
• 7/16" socket and ratchet
• 1/2" open-end wrench
• Combination wrench set
• Wire cutters
• Needle nose pliers
• Channellock® pliers
• 5 mm allen wrench
• 5/32" allen wrench
• Punch
• Hammer
• Soldering iron
• 60/40 lead tin rosin core solder
• (2) 2" x 4" x 30" wood pieces
• P/N 8252 M-1 penetrating oil
• P/N SA3351 lithium grease
• P/N SA3352 gear grease
• P/N SA0646 Teflon® spray lubricant (dry)