Technical Specifications
94 Progressa® Bed Instructions for Use (171528 REV 9)
Medical equipment needs special precautions in regard to electromagnetic compatibility (EMC) and
needs to be installed and put into service according to the EMC information supplied in the tables that
follow.
Guidance and Manufacturer's Declaration—Electromagnetic Emissions
The P7500 is intended for use in the electromagnetic environment specified below. The customer or the user of
the model P7500 should make sure it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment—Guidance
RF emissions
CISPR 11
Group 1 The P7500 uses RF energy only for its internal func-
tions. Therefore, its RF emissions are low and are not
likely to cause any interference in nearby electronic
equipment.
RF Emissions
CISPR 11
Class A The P7500 is suitable for use in all establishments other
than domestic establishments and those directly con-
nected to the public low-voltage power supply net-
work that supplies buildings used for domestic
purposes.
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
Need help?
General
