Bed Frame Features
42 Progressa® Bed Instructions for Use (171528 REV 9)
To Use:
1. Raise the handles from the stowed position.
2. Lower the handles into the bed frame.
To Stow:
1. Pull the handles upward from the bed frame.
2. Lower the handles inward toward the center of the bed until they
stop moving.
Caution—Do not push or pull the bed by IV poles or other equipment. Use the transport handles or
footboard. Failure to do so can cause equipment damage.
Transport Position
To help prevent injury and/or equipment damage, obey these warnings:
• Warning—Do not transport a patient with the bed in a FullChair®, Chair Egress, or Dining Chair®
position.
• Warning—Do not push or pull the bed by the IV poles.
Caution—Use caution when you move the bed through doorways. Equipment damage could occur.
The bed is intended to be used to transport patients with the foot end of the bed forward. Prior to
transport, properly store the power cords to prevent tripping. Use the power cord storage hook at the
head-end of the bed. Take care to prevent damage to AC power cords. An electrical shock hazard exists.
Use only transport handles or the footboard to move the bed.
To Next Page
Loading...
Need help?
General
