Future revisions of a part might not always be backwards compatible with a legacy part. To
determine the correct replacement part for your unit, always provide the serial number and model
when ordering.
To repair a 3rd edition device component, you might need to use a service kit to upgrade the
component. To determine whether you need to use an upgrade kit to replace a component for the
first failure, consult the 3rd edition service kits for the first component failure table to locate the
correct service kit to use with your device.
NOTE Upgrading a component does not make the device 4th edition compliant.
If the device encounters a failure after you upgrade a device component, consult the 3rd edition
service kits for subsequent component failure table to determine which service kit to use.
3rd edition service kits for first component failure
Use this table to determine the correct part to order for the first component failure.
Device
Model
Number
Main
Board
SureTemp
Plus
Masimo Nellcor Nonin Braun
Dock
Braun
Thermom
eter
7*CE 107156 - - 107156 - 107156 107156
7*CT 107155 107155 - 107155 - - -
7*CX 107162 - - 107162 - - -
7*ME 107157 - 107157 - - 107157 107157
7*MT 107154 107154 107154 - - - -
7*MX 107158 - 107158 - - - -
7*XE 107153 - - - - 107153 107153
7*XT 107152 107152 - - - - -
7*XX 107163 - - - - - -
7*WE 107153 - - - 105933 107153 107153
7*WT 107152 107152 - - 105933 - -
7*WX 107163 - - - 105933 - -
*Varies depending on the model number of your device.
Service manual Field replaceable units 93
To Next Page
Loading...
Need help?
General
