Procedure
1. Specify external volume group (1-1) assigned to the primary storage
system to create an external volume whose LDEV ID is 0x9999. Allocate
all capacity in the external volume group.
raidcom add ldev -external_grp_id 1-1 -ldev_id 0x9999 -capacity
all -IH0
2. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH0
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 311111 -
3. Specify external volume group (1-2) assigned to the secondary storage
system to create an external volume whose LDEV ID is 0x8888. Allocate
all free space in the external volume group.
raidcom add ldev -external_grp_id 1-2 -ldev_id 0x8888 -capacity
all -IH1
4. Confirm that asynchronous command processing has completed.
raidcom get command_status -IH1
HANDLE SSB1 SSB2 ERR_CNT Serial# Description
00c3 - - 0 322222 -
4-22
Configuration and pair management using CCI
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide
To Next Page
Loading...
