Hitachi G1000 - Page 103

Check command and output examples
1. Display information about the volume (LDEV ID: 0x9999).
raidcom get ldev -ldev_id 0x9999 -fx -IH0
Serial# : 311111
LDEV : 9999
SL : 0
CL : 0
VOL_TYPE : OPEN-V-CVS
VOL_Capacity(BLK) : 61440000
NUM_PORT : 0
PORTs :
F_POOLID : NONE
VOL_ATTR : CVS : ELUN
E_VendorID : HITACHI
E_ProductID : OPEN-V
E_VOLID :
48495441434849203530333032423637414141410000000000000000000000000
0000000
E_VOLID_C : HITACHI 500308235AAAA................
NUM_E_PORT : 1
E_PORTs : CL5-A-0 0 50060e8007823520
LDEV_NAMING :
STS : NML
OPE_TYPE : NONE
OPE_RATE : 100
MP# : 0
SSID : 0007
RSGID : 0
2. Display the information about the volume (LDEV ID: 0x8888). Confirm
that the information about the external volume is correct.
raidcom get ldev -ldev_id 0x8888 -fx -IH1
Serial# : 322222
LDEV : 8888
SL : 0
CL : 0
VOL_TYPE : OPEN-V-CVS
VOL_Capacity(BLK) : 61440000
NUM_PORT : 0
PORTs :
F_POOLID : NONE
VOL_ATTR : CVS : ELUN
E_VendorID : HITACHI
E_ProductID : OPEN-V
E_VOLID :
48495441434849203530333032423637414141410000000000000000000000000
0000000
E_VOLID_C : HITACHI 500308235AAAA................
NUM_E_PORT : 1
E_PORTs : CL5-C-0 0 50060e8007823521
LDEV_NAMING :
STS : NML
OPE_TYPE : NONE
OPE_RATE : 100
MP# : 0
SSID : 0005
RSGID : 0
Configuration and pair management using CCI
4-23
Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide