Hitachi PXR-D User Manual

6-24 ● Transmission Sequences
Transmit the line count consecutively to items 7 and 8. If you transmit the line
count to only one of them, a communication error occurs.
(4) If you do not specify the item number, the setup data applies to all
print items.
NOTE: When transmitting print format and print specification data
consecutively in a single chain, ensure that the print format data
precedes the print specifications data.
If this order is reversed, a communication error occurs.
6.4.4-2 Text setup rules
(1) Print format
a）Line count
¡ When you change the line count for a print item in a certain column, you must
also set the line count for the other print items that belong to the same column.
(Example)
Setting items 7 and 8 to
one line
1357
2468
13 5
24 6 78
¡ When you change the line count for a print item, you must also set the line
count for the other print items that belong to the same column as the former one.
(Example)
Setting items 7 and 8
to two lines
13 57
24 68
135
2 4 678
Transmit the line count consecutively to items 7 and 8. If you transmit the line
count to only one of them, a communication error occurs.
¡ Increased width
¡ Two or more print format items can be consecutively transmitted in a single chain.
ESC Header 28H
Increased
width
Increased width（1to 9）
¡ Code set (Code128)
ESC Header 3FH code set
0: code set B; 1: code set C
¡ Bar code "used"→ "not used"
ESC Header
29H 30H
Use (0: not used; 1: used)
¡ Bar code "not used" → "used"
¡ Prefix code (EAN-13)
Bar code type（0 to 6）
ESC Header 29H 31H ESC Header 2AH Type
Use (0: not used; 1: used)
ESC Header 2CH
Tens Unit
position position
Prefix code（00 to 99）

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English