ENGLISH
Hot Water Tank
Considerations:
• When Operation status is DHW ON: inlet pipe has orange color inside and arrows moving. Outlet pipe is blue with arrows too.
• When not working on DHW ON pipes are shown in light grey.
• When antilegionella is enabled a text is shown, indicating if it is being execute or not.
• T
WO
is T
WHP
when using a YUTAKI S COMBI, otherwise:
- If buffer tank is located after DHW use T
WO
, if buffer tank is located before DHW use T
WO3
- Otherwise use T
WO
• Second sensor temperature shown only for YUTAKI S COMBI.
Swimming Pool
Considerations:
• When demand off: inlet and outlet pipes are gray.
• When demand on: T
WO
water is orange (hot) and T
WI
water is blue (cold).
UNIT CONTROLLER (PC-ARFH2E)
PMML0575 rev.2 - 03/2022
199
To Next Page
Loading...