Hitachi YUTAKI RWM-2R1E - Page 287

ENGLISH

• Congure circuit 1 and circuit 2 OTC: Deactivated, Points, Gradient, Fix.
• Enable or disable DHW and Swimming Pool.
• Select the heating source: HP only, HP + EH, HP + Boiler.
• Congure electrical heater use: Starting or Backup.
• Congure Boiler type: Parallel or Serial.
• Congure Solar Combination options: Deactivated, Input Demand, Total Control. (only in case DHW is enabled).
• Select Next and press OK button.

• Congure circuit 1 and circuit 2 options (Only available for cooling mode): Deactivated, Points, Gradient, Fix.
• Select Next and press OK button.

• Enable or disable the desired modules (module 1 is enabled by default)
• Select Next and press OK button.
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
273