Hitachi YUTAKI RWM-2R1E - Page 288


• Enable or disable the individual DHW for each module.
• Select Next and press OK button.

• Congure thermostat (1 or 2): None, wired or wireless.
• Check RT address if wired is selected.
• Select Wireless binding ID (1 or 2) if wireless is selected.
• Congure Fan coils: Deactivated, cooling, heating or heat & cool if wired is selected.
• Select Wizard complete and press OK button.

• Select Yes to complete the conguration.
• Press OK button to go to the main screen.
YUTAKI CASCADE CONTROLLER ATW-YCC-03
PMML0575 rev.2 - 03/2022
274