Hitachi YUTAKI Series - Page 203

201
Troubleshooting procedure
SMGB0066 rev.0 - 12/2009
Troubleshooting
Service Manual
7
 


• ThealarmcodeisdisplayedonthePCB´sdisplay.
– This alarm code is displayed when wrong settings are performed in DIP switches on PCB.
Are the DIP switches on
PCB1correctlyset?
(Refer to "Setting the Dip
Switches")
No
Turn OFF the power and set
the DIP switches correctly
Yes
Failure of PCB1
Replace PCB1