Honeywell 35 Series Network Video Recorder User Guide
92
Figure 119 Live view interface
Table 30 Navigation Bar Icons
Icon Description
Main menu
Layout, choose or set the layout to display live view.
Switch to next page of layout.
Auto sequence, click to play the live view automatically by layout
screen.
Volume, adjust the volume of Audio Out.
Playback, click icon to enter the playback interface. The detail
please refer to Playback
Channel information, select to show channel No. or Stream
information. Choose the channel, and the information can be
showing on live view.
Live view strategy, there are three modes, fluency / balanced / real
-time.
Manual alarm, click to enter manual alarm pop-up window.
Operate manually the NVR IO alarm input port and channel
cameras alarm in ports.
Event list, show real-time alarm messages.
Clear alarm.
Information, network, system, channel, disk, alarm information.
The time of NVR.
The current channel is recording.
Alarm, the current channel has motion detection alarm.
To Next Page
Loading...
Need help?
General
