Honeywell 35 Series User Manual

Honeywell 35 Series Network Video Recorder User Guide
63
Parameter Description
If you learn about the local DNS server IP, you can input
the preferred DNS server and alternate DNS server
manually.
Preferred DNS In the Preferred DNS box, enter the IP address of DNS.
Alternate DNS
In the Alternate DNS box, enter the IP address of
alternate DNS.
4. Click APPLY.
Configuring Router
1. Log in to the router to set the WAN port to enable the IP address to
connect into the WAN.
2. Enable the UPnP function on the router.
3. Connect the Device with the LAN port on the router to connect into
the LAN.
4. Go to Main Menu > Network > Network, configure the IP address into
the router IP address range, or enable the DHCP function to obtain an
IP address automatically.
Port
You can remote access the NVR Web through IP different ports.
1. Go to Main Menu > Networks > Networks > Port.
The Port interface is displayed.
Figure 77 Port Interface
2. Configure the settings for the connection parameters.
Note:
If the port parameters are modified, then the device will be restarted.

Honeywell 35 Series Specifications

General

Video Compression	H.264
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Weather Resistance	Yes
Lens	2.8mm