CHAPTER
103
Performance Series Embedded NVR User Guide
4 WEB OPERATION
This chapter is intended for remote users of the NVRs. It describes how to
access Honeywell’s 35 Series Network Video Recorder remotely using a
browser-based web client.
This chapter contains the following sections:
• Network Connection, page 103
• Web Login, page 104
• Web Main Menu, page 105
•
The interfaces in the Manual are used for introducing the operations
and only for reference. The actual interface might be different
dependent on the model you purchased. If there is inconsistency
between the Manual and the actual product, the actual product shall
govern.
•
Besides Web, you can use our HDCS to login the device. For detailed
information, refer to HDCS user guide.
Network Connection
Ensure that the following conditions are met:
• Ensure that the network connection is good.
• Ensure that the NVR and PC network setup is correct. See the network
setup: Main Menu > Network > Network.
• Ping to ensure that the network connection is good. Ping *** *** *** ***
(where *** *** *** *** is the NVR’s IP address). The return TTL should be
less than 225.
To Next Page
Loading...
Need help?
General
