Honeywell 35 Series User Manual

Honeywell 35 Series Network Video Recorder User Guide
10
HN35160200N
Figure 9 Front Panel (HN35160200N)
Table 10 NVR Front Panel Description (HN35160200N)
No. Name Description
1 USB port
Connect to peripheral USB 2.0 storage device, mouse and
so on.
2 POWER The light is on when the power connection is OK.
3-4 HDD1/HDD2
The green light is flash when the device is recording, if the
disks are not working, lights are always bright. The light is
off without disk.
Figure 10 Rear Panel (HN35160200N)
Table 11 NVR Rear Panel Description (HN35160200N)
No. Name Description
1 LAN1
Network port. 10M/100Mbps self-adaptive Ethernet port.
Connect to the network cable.
2 LAN2
Connect to the network cable, LAN2 port is only allowed to
connect cameras, cannot to connect to Internet.
3 AUDIO OUT
Audio output port. It is to output the analog audio signal
to the devices such as the sound box.
• Bidirectional talk output.
• Audio output on 1-window video monitor.
Audio output on 1-window video playback.
10

Honeywell 35 Series Specifications

General

Video Compression	H.264
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Weather Resistance	Yes
Lens	2.8mm