Honeywell 35 Series User Manual

Honeywell 35 Series Network Video Recorder User Guide
21
• Configure date and time, time zone DST
• Configure P2P
• Search for and add IP cameras
• Configure Disk Manager
• Set resolution
1. Click SETUP WIZARD in the Setup Wizard window. Set Network
according to the actual environment on the Network page, and then
click Next.
Figure 21 Network
2. Set Date and Time, Time Zone, DST according to actual environment,
and then click Next.
Figure 22 Setup Wizard – Date and Time

Honeywell 35 Series Specifications

General

Video Compression	H.264
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Weather Resistance	Yes
Lens	2.8mm