Honeywell 35 Series User Manual

Honeywell 35 Series Network Video Recorder User Guide
83
check the corresponding rights for current user.
Table 29 Add Interface Parameters
Parameter Description
User Name Enter a user name and password for the account.
For user name should meet the rules: only these special
characters are supported !@#$*+-=%&”`()./’.:;<>?^|~[]
Password requirement;
-The password must be between 8 to 20
-Upper & lower case letters
-At least on number
-Support the symbol -_@%^.~?#$=+”:,& only and must contain
at least one of them
-The first character must be a number or letter
-No space
Password
Confirm password Re-enter the password.
Group
Select a group for the account, there are three groups,
administer/ operator /media user.
The user rights must be within the group permission.
Change password
frequency
To keep safety of device to modify the password regularly.
Password expire date Enable to set the duration of user account.
Figure 106 Permission
5. Click OK.
Click to modify the corresponding user information, click to
delete the user.
Adv. Setting
1. Go to Main Menu > System > User Account > Adv. Setting.
The Adv. Setting interface is displayed.

Honeywell 35 Series Specifications

General

Video Compression	H.264
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Weather Resistance	Yes
Lens	2.8mm