Honeywell 35 Series User Manual

Honeywell 35 Series Network Video Recorder User Guide
25
Figure 28 Reset Password
2. Input the old password, and create a new password and confirm it.
3. Click APPLY to set settings.
Resetting Password on Local Interface
1. Enter the Login interface.
• If you have configured unlock pattern, the unlock pattern login interface
is displayed. Click Password, the password login interface is displayed.
• If you did not configure unlock pattern, the password login interface is
displayed.
2. Click Forgot Password. Set the parameters according to the
instruction on the pages.
Figure 29 Password Reset 1
3. Set new password.
In the New Password box, enter the new password and enter it again
in the Confirm Password box.

Honeywell 35 Series Specifications

General

Video Compression	H.264
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Weather Resistance	Yes
Lens	2.8mm