94
CAUTION
Composite point sampling may expose employees to hazardous conditions by
lowering the gas detection capability. Use Composite Points only if the rate of scan
must be increased. The following rules apply and must be followed:
1. Group only the sample areas to avoid combining long and short tube runs,
which may cause an imbalance in the composite mixture.
2. Group points that have identical Single Point Configurations, i.e., the same
method with the same active gases and the same Alarm 1 and Alarm 2 set
points
7.7.
Settings – Method Manager
Settings> Method Manager
Analytical methods (defined in Analytical methods) are dynamic. They may be updated,
new methods added, and old methods deleted as often as necessary to keep pace with
the ever-changing R&D and production chemicals.
The file should be in the specified folder to import a method file.
• In the local PC (PPC), /Desktop/Local PC/method/
• In a USB drive, [USB Drive:]\method\
Use the Method Manager to import new and updated methods and delete ones no longer
used. The menu is shown in Figure 61.
Figure 61. Method Manager
To Next Page
Loading...
