85
7.
Settings Menu
7.1.
Accessing the settings menu
Only authorized users with an access code can change the setup program. You must log
in before making changes, and you must log out afterward to prevent unauthorized
changes to the setup.
7.2.
ACM Configuration
Settings> ACM Configuration
Admin users can set ACM configuration parameters.
CAUTION
Please contact Honeywell service for more information
7.3.
Settings - General Configuration
7.3.1. Date and Time Configuration
Settings> General Configuration>Date/Time
Set the time using a 24-hour clock.
7.3.2. Network Configuration
Settings> General Configuration>Network
Check SBC IP Address. It is fixed; you cannot change it.
7.4.
Settings – Account Manager
Settings> Account Manager
Access levels should be assigned only to personnel authorized to change the setup
program and to trained technicians who perform services and diagnostics. Select the
Login level, which prompts you to enter a password.
A default administrator account and password are created by Honeywell in the
configuration software and given to the person in charge of the ACM 150 monitor. Log in
administrator account can access the Account Manager menu as shown.
Select an access level, access ID, and password when creating an account.
6~16 characters long with numbers and upper/lowercase letters.
Password
8~12 characters long with numbers, upper/lowercase letters, and at
least one unique character.
To Next Page
Loading...
