Honeywell ACM 150 - Background Scan; Figure 71. Acquire Background

ACM 150
108
10.2.1. Background Scan
Diagnostics> Background Scan
You can obtain a background spectrum on demand by selecting ‘Background scan.’ As
shown in Table 6, the background spectrum is displayed for evaluation.
In this mode, it is also possible to ‘Save New Factory Background’ Scan,’ which would
replace the prior reference background.
NOTE
Only save a new factory background if your Honeywell service technician or
application chemist requests it. There should be a valid reason for updating this
reference.
Figure 71. Acquire Background