1
1.
Instruction
Thank you for selecting a Honeywell product for your monitoring requirement.
Honeywell is committed to providing quality products and services. The information
outlined in this manual is provided to assist our customers in using our products correctly.
Therefore, it is essential that you take the time to read and fully understand this manual
before installing or operating this product.
ACM 150 systems provide multi-point air monitoring for the presence of gases and the
vapors of liquid chemicals. As with any processing system, malfunction and failure can
occur due to unforeseen or uncontrollable circumstances. Honeywell, its officers,
managers, engineers, and representatives cannot be held responsible for such failure nor
the customer’s negligence or misuse of this equipment. At the very least, follow the
procedures and recommendations outlined in this document for proper system functioning.
The information in Honeywell’s published engineering specifications, manuals, and guides
is correct as of the publication date. Honeywell is not responsible for product application,
including but not limited to compatibility with other equipment. Honeywell shall not, under
any circumstances, be liable to the buyer or any other party for lost profits, diminution of
goodwill, or any other special or consequential damages concerning any claim. In addition,
Honeywell’s liability for warranty claims shall not, in any event, exceed the invoice price of
the product claimed defective, nor shall Honeywell be liable for delays in the replacement
or repair of the product.
Honeywell makes no warranties or representations regarding the information outlined in
this manual and reserves the right to change the specification(s) of the product described
at any time without notice and without obligation to notify any person(s) of such
modifications or revisions.
Gas detection equipment must be installed in the correct locations. Please do so to ensure
it is effective. For advice, please refer to local codes of practice or national standards.
Installation in hazardous areas must comply with your local codes of practice or national
standards. Equipment installed in hazardous areas must not be serviced unless classified
as “non-hazardous.”
Only authentic Honeywell spare parts may be used for repair and maintenance.
Modifications of components are not authorized. Using any parts other than Honeywell
renders the warranty null and void.
No unauthorized distribution and reproduction in any form, electronic, verbal, stored in a
retrieval system, computer language of any kind, mechanical, manual, or otherwise, of this
information in any form is permitted without the express written authorization of Honeywell.
NOTE
The ACM 150 monitor gas list is updated frequently. Please contact us for the
latest version.
1.1.
Contacts
sps.honeywell.com
To Next Page
Loading...
