Honeywell ACM 150 - View Spectrum; Hardware Service; Figure 73. View Spectrums

ACM 150
110
10.2.3. View Spectrum
Diagnostics> View Spectrum
This screen shows the selected spectrum. You can compare it to reference spectra.
Figure 73. View Spectrums
10.2.4. Hardware Service
Diagnostics> Hardware Service
10.2.4.1. Cycle valve test
Diagnostics> Hardware Service >Cycle valve test
This mode displays the ACM 150 monitor flow schematic. The same schematic is
displayed in automatic mode, View valve cycles, except you have control over each valve.
Click the valve on the screen to turn on and turn off.
When selected and activated to open, 2-way valves show with a
white fill. Flow can pass through these open valves.
Select the white valve again to close the valve.
When you enter this mode, all valves are inactive.