Honeywell ACM 150 - Settings - Order of Scan; Reviewing the Order of Scan; Figure 56. Order of Scan

ACM 150
89
7.6. Settings – Order of Scan
Settings> Order of Scan
The Order of Scan defines the point scanning sequence. Points may be scanned in any
order and repeated in the sequence, and they can also be in the sequence without being
made active.
7.6.1. Reviewing the order of scan
Enabled points are listed. These points will be scanned. Only listed Points will be scanned.
Scroll down the page to view the complete sequence.
Figure 56. Order of Scan