Honeywell ACM 150 - Appendix; Appendix A. Master Parts List

ACM 150
136
12. Appendix
Appendix A. Master parts list
1. BASE UNIT
76-ACM150-115-1
FTIR-based analyzer for measurement of up to 15 gases per sample point.
Includes primary venturi pump with automatic switch-over to electric
backup pump, touchscreen user-friendly interface (point and click), built-in
diagnostics, configurable gas selection, web-based user interface, 10-point
sample valve assembly including dust filter, 80 user-programmable relay
contacts; requires method(s) for detection of gases according to
customer's gas list. Power requirements: 120 Vac, 5 m path length gas cell
76-ACM150-115-2
FTIR-based analyzer for measurement of up to 15 gases per sample point.
Includes primary electric pump with automatic switch-over to electric
backup pump, touchscreen user-friendly interface (point and click), built-in
diagnostics, configurable gas selection, web-based user interface, 10-point
sample valve assembly including dust filter, 80 user-programmable relay
contacts; requires method(s) for detection of gases according to
customer's gas list. Power requirements: 120 Vac, 5 m path length gas cell
76-ACM150-230-1
FTIR-based analyzer for measurement of up to 15 gases per sample point.
Includes primary venturi pump with automatic switch-over to electric
backup pump, touchscreen user-friendly interface (point and click), built-in
diagnostics, configurable gas selection, web-based user interface, 10-point
sample valve assembly including dust filter, 80 user-programmable relay
contacts; requires method(s) for detection of gases according to
customer's gas list. Power requirements: 240 Vac, 5 m path length gas cell
76-ACM150-230-2
FTIR-based analyzer for measurement of up to 15 gases per sample point.
Includes primary electric pump with automatic switch-over to electric
backup pump, touchscreen user-friendly interface (point and click), built-in
diagnostics, configurable gas selection, web-based user interface, 10-point
sample valve assembly including dust filter, 80 user-programmable relay
contacts; requires method(s) for detection of gases according to
customer's gas list. Power requirements: 240 Vac, 5 m path length gas cell
2. ACM Method Development
100-12899-00
Method Generation / Setup (per gas)
Please contact Sales or Service for a customized Method quote or method
testing. Developing methods for gases for which Honeywell does not have
spectra requires
further lab time in addition to the Method Generation
charge of $800 per chemical.
3. OPTIONS AND ACCESSORIES
76-215-12477-00
ACM internal hardware for Line Leak Option for dual electric pump systems
76-215-12475-00
ACM internal hardware for Line Leak Option for Venturi pump systems. Note:
Assy, Line Leak requires qty two off item 76-220-13588-00 when used as a
replacement for ACM 100.
76-150-14393-04
10-point Sample Manifold includes a Dust Filter. Up to 3 max may be added
to base unit – 40 points total.
76-165-14582-00
Kit, Dust Filter 3/8T
76-165-14600-00
Kit, Filter, Sample
76-165-14594-00 Kit, Line Leak, 3/8T Check Valve
0235-0252 FEP tubing 0.25" ID X 0.375" OD, 300 m length
76-150-14392-02 Kit, Data Interface, Control Net B3514
76-150-14398-02 Kit, Data Interface, Control Net, Redundant B3514
76-150-14391-10 Kit, Data Interface, Modbus TCP/IP