81
Form 3: Details of alarms, problems, or non-spec performance
NOTE
Store spectra of all Alarm 1/Alarm 2 Incidents (s).
For an expert evaluation, contact your local representative. You can e-mail files
directly to Honeywell.
6.9.3. Signal-to-noise ratio
Important warning and disclaimer:
Set enable SNR makes display SNR trend graph to monitor FTIR bench status.
Setting the enable SNR fault on samples can inhibit gas alarm events, which can help
suppress potential false gas alarm events caused by potential system failure.
The customer enables the signal-to-noise ratio on samples at their own risk.
Honeywell disclaims all liability resulting from customers enabling signal-to-noise ratio on
samples.
6.9.4. Maintenance gas
Important warning and disclaimer:
Set maintaining gases can suppress gas alarm events for the user's intended gas
exposure, such as the cleaning process on the points.
Honeywell disclaims all liability resulting from customers' Maintenance gas settings.
To Next Page
Loading...
