4
2.
Safety
This section highlights critical safety and ergonomics issues related to using the ACM 150
monitor. Matters addressed include risk analysis, chemical safety, electrical safety,
flammability, and ergonomics.
2.1.
Safe and proper operation of the ACM 150 monitor
The ACM 150 monitor design assures that an operator using a local keypad and display
is protected from injury. Likewise, there is no danger to the operator from opening the
inner door or removing the pump cover on the ACM 150 monitor for inspection purposes.
No internal plates, shields, or components should be touched, tested, removed, or
serviced except by a trained technician. The user must read and follow all warning labels
on the monitor and the highlighted CAUTION, WARNING, and DANGER notes in this
manual.
If the ACM 150 monitor is used in a manner not specified in this manual, the equipment's
protection may be impaired.
2.2.
End user responsibilities
Use only the most current revision of this manual. The information in Honeywell’s
published engineering specifications, manuals, and guides is correct as of the publication
date. Honeywell is not responsible for product application, including but not limited to
compatibility with other equipment.
The end user and their subcontractors must ensure that their respective employees
receive hazardous communication training that meets or exceeds OSHA 29CFR 1910.120
(hazardous waste operations and emergence response). End users and their
subcontractors who work on the ACM 150 monitor must ensure that their respective
employees are provided with material safety data sheets from their Environmental Health
and Safety (EHS) department for all gases and chemicals the ACM 150 monitor monitors.
After all repairs, the ACM air composition monitor must be verified to function correctly. Its
performance may be impaired if not used as specified in this manual.
2.3.
Safety notices and terms
Review this manual carefully. Always follow approved safety procedures, including
lockout/tagout devices, proper clothing, and eye and face protection. Pay particular
attention to warnings and precautions in this manual.
The following is an example of warnings used in this manual.
(Please carefully read instructions anywhere a Warning or Danger is used in the manual).
2.4.
Danger/Warning/Caution/Note
DANGER
Warns about hazards that will cause serious personnel injury, death, or significant
property damage if ignored.
To Next Page
Loading...
