Honeywell ACM 150 - Page 170

ACM 150
160
Trade name: Zinc Selenide
Appearance
• Form: Solid
• Color: Dark Brown
• Odor: Characteristic
• Odor threshold: Not determined
pH-value: Not applicable.
Change in condition
• Melting point/Melting range: >1100°C
• Boiling point/Boiling range: Undetermined.
Flash point: Not applicable.
Flammability (solid, gaseous): The product is not flammable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Not determined.
The danger of explosion: The product does not present an explosion hazard.
Explosion limits:
• Lower: Not determined.
• Upper: Not determined.
Vapor pressure: Not applicable.
Density at 20°C: 5.42 g/cm³
Relative density: Not determined
Vapor density: Not applicable.
Evaporation rate: Not applicable.
Solubility in / Miscibility with water: Not miscible or difficult to mix.
Segregation coefficient (n-octanol/water): Not determined.
Viscosity Dynamic: Not applicable.
Kinematic: Not applicable.
Organic solvents: 0.0 %
Solids content: 100.0 %
Other information: No further relevant information is available.
10 Stability and reactivity
Thermal decomposition/conditions to be avoided: No decomposition if used according
to specifications.
Possibility of hazardous reactions: No dangerous reactions are known.
Conditions to avoid: No further relevant information is available.
Incompatible materials: No further relevant information is available.
Hazardous decomposition products: No dangerous decomposition products are
known.
11 Toxicological information
Acute toxicity