Honeywell Apex User Manual

104
MAN0604_Issue 09_02-2013 Apex
2110M8030
APPENDIX A - SPECIFICATIONS
A.1.11 Calibration intervals
Cartridgedependent.ThereisnoroutinecalibrationoftheTransmitterUnitorCertiedSensor
electronics
.
A.2 CARTRIDGES
TheCertiedSensorcanbettedwithanyoneofanumberof
interchangeable cartridges. Each replaceable cartridge contains a gas
sensing transducer and its calibration/manufacturing information. It is
possible to replace the cartridge without removing the power from the
    CertiedSensor,eveninhazardousenvironments.
Threetypesofcartridgeareavailable:
• electrochemical cell
• catalytic (SG16 type)
• Oxygen

Honeywell Apex Specifications

General

Type	Addressable Fire Alarm Control Panel
Power Supply	120/240 VAC, 50/60 Hz
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	10% to 93% non-condensing
Compatibility	Honeywell Notifier devices and compatible peripherals
Certifications	UL, FM, CSFM