Honeywell Apex - Certified Sensor Certifications

120
MAN0604_Issue 09_02-2013 Apex
2110M8030
APPENDIX B - CERTIFICATION
B.2 CERTIFIED SENSOR
TheCertiedSensorisdesignedandapprovedforuseinhazardousareas.
Therearesixcertiedsensortypes:
Sensor - ECC/Catalytic
• ATEX Part No: 2110B2000 or 2110B2070
• UL Part No: 2110B2003 or 2110B2073
• CSA Part No: 2110B2004 or 2110B2074
Sensor - Thick Film
• ATEX Part No: 2110B2010 or 2110B2010
• UL Part No: 2110B2013 or 2110B2013
• CSA Part No: 2110B2014 or 2110B2014
TheUL/CSACertiedSensorissuitableforconnectiontoanApexTransmitterUnitoranApex/
Matrix Junction Box.
Caution: OnlycartridgeswiththefollowingpartnumberscanbettedtotheCertied
Sensor:
2110B30x0, 31x0, 32x0, 33x0, 34x0, 35x0 series
2110B3700 - 2110B3999 range
CertiedSensorapprovedtoCSA 22.2 No. 152onlywhenttedwithspeciccartridges.SeeB.5
Control Drawings, CSA (page 126)
AcerticationlabelislocatedonthebodyoftheCertiedSensor.Thelabelcontainsalltherelevant
informationregardingtheproduct’sidenticationandcerticationstate.
Special conditions for safe use - ATEX
1. The integral leads shall be protected from impact and suitably terminated.
2. Equipotential bonding is to be provided by the mounting arrangement.
3. The sensor is not to be used in atmospheres containing more than 21% oxygen.