Honeywell Apex User Manual

57
MAN0604_Issue 09_02-2013 Apex
2110M8030
4.4.1 Calibration Menu
Caution: Thecalibrationprocedureshouldonlybeperformedbyqualiedpersonnel.
Caution: "If "Yes" is selected for the "Span Calibrate?" option, the span calibration must
be completed successfully. Failure to do so will result in the unit signaling a
"Calibration Needed" fault.
Calibration Menu
Gas Calibrate
Gas Challenge
4-20 mA Set Zero
Force 4-20mA
Force Relays
Force Digital
The Calibration Menu allows settings for the Transmitter Unit to be made, e.g. relay operation, and
alsosettingsfortheCertiedSensor,e.g.gascalibrate.
This menu is protected by a Level 2 password.
4. OPERATION

Honeywell Apex Specifications

General

Brand	Honeywell
Model	Apex
Category	Fire Alarms
Language	English