If the device is connected successfully, the device information will be showed on the
right side of the DataMax
®
Configuration Program.
Device Information Description
Select the tab of DataMax
®
, the device information description is
shown as follow.
Imaging Settings & Statistics
When configuring the reader to work in a proper status, a good method is to monitor
the images captured by the reader and tune the reader to acquire a better image with
proper exposure and gain parameters.
These things could be done through the DataMax
®
Configuration Program.
Open the DataMax
®
Configuration Program and connect to the device first.
Then enter “Tuning” Tab page.
Through this tab page, user can also monitor the decoding results and logging the
results.
User can also use the “Auto Train” function to tune parameters of the reader
automatically.
To Next Page
Loading...
Need help?
General
