Redundant times: output the decode result only when got identical barcodes
information for specific times.
Minimum Length: output the decode result when the symbology length equal or
larger than the minimum length.
Maximum Length: output the decode result when the symbology length equal or
shorter than the maximum length.
Append Mode: This function allows the HF800 to append the data from several
HF800 bar codes together before transmitting them to the host computer. When the
HF800 encounters an Aztec bar code with the append trigger character(s), it buffers
the number of Aztec bar codes determined by information encoded in those bar
codes. Once the proper number of codes is reached, the data is output in the order
specified in the bar codes.
Strip Append Information:
When enabled strips off the append information from the
barcode. Details of what that info is can be found in the Aztec ISO specification. For
debug purposes, this mode allows the append information to be output with the data.
Maxicode
Click the “Maxicode” in the left list then all its related parameters will be shown on the
right.
Redundant times: output the decode result only when got identical barcodes
information for specific times.
Minimum Length: output the decode result when the symbology length equal or
larger than the minimum length.
Maximum Length: output the decode result when the symbology length equal or
shorter than the maximum length.
To Next Page
Loading...
Need help?
General
