Redundant times: output the decode result only when got identical barcodes
information for specific times.
Minimum Length: output the decode result when the symbology length equal or
larger than the minimum length.
Maximum Length: output the decode result when the symbology length equal or
shorter than the maximum length.
Append Mode: This function allows the HF800 to append the data from several
Code 128 bar codes together before transmitting them to the host computer. When
the HF800 encounters a Code 128 bar code with the append trigger character(s), it
buffers Code 128 bar codes until it reads a Code 128 bar code that does not have
the append trigger. The data is then transmitted in the order in which the bar codes
were read (FIFO).
Function Code Transmit: If enabled, the hex value for the function character will be
sent out in the data stream. For 128 Function 1, Function 2, Function 3, Function 4 all
cause special things to happen per the ISO Specification. If enabled, this setting
causes Function 1, 2 and 4 to be ignored and sent out raw. This does not apply to
function 3 as that signifies a menu command in code 128.
ISBT Decoding: The ISBT 128 Application Specification describes 1) the critical data
elements for labeling blood products, 2) the current recommendation to use Code
128 due to its high degree of security and its space-efficient design, 3) a variation of
Code 128 that supports concatenation of neighboring symbols, and 4) the standard
layout for bar codes on a blood product label.
Code 39
Click the “Code 39” in the left list then all its related parameters will be shown on the
right.
To Next Page
Loading...
Need help?
General
