Auto-Train
HF800 can support Auto-Train function. When execute, it can help to tune the
imaging parameters and identify the barcodes in front of the reader’s FOV
automatically.
This function can help to reduce the distribution time.
Auto-Train Tuning Steps:
1. Open the DataMax
®
Configuration Program and connect to the device.
2. Go to the “Tuning” Tab page.
3. In the “Auto Train” panel, we can choose the option “Default” or “Customize” to
tell the reader how to operate the auto tuning process;
If choose “Default”, reader will tune the imaging parameters by itself.
If choose “Customize”, user can specify the minimum and maximum value for the
exposure time and the maximum gain could be limited to the value in between
1,2,3,4,6,8.
4. Click to start the auto learn process.
Note: Suggest to enable the live view function to monitor the whole auto learn
process.
Wait for several seconds, reader will give the feedback.
If success, reader will beep for 3 times and a dialog will appear to inform the user.
To Next Page
Loading...
Need help?
General
