Right click in the Log View, a popup menu will appear,
Choose “Save to file” to save the result to specified file.
Choose “Clear” to clear all the information in the Log View window.
Statistics
The “Statistics” panel will show all the current decoding counters.
Through it, user can monitor the decoding rate and average decode times.
Click the “Reset” button will reset all the counters to zero.
Image Setup
From this panel, the reader’s exposure mode could be configured to be auto
or fixed.
In auto mode, the reader will adjust the exposure time and gain automatically
per the images it captured from the sensor.
If change to fixed mode, the reader’s exposure time and gain will be the
values typed in the edit box.
To Next Page
Loading...
Need help?
General
