Honeywell HF800 Series User Manual

45
Operating Mode
Streaming Presentation Mode
When in Streaming Presentation Mode, the reader remains on all the time to
continuously search for barcodes. The reader’s illumination and aimer can be
configured to be on or off.
To configure the reader to work in this mode, open the DataMax
®
Configuration
Program and Connect to the specific device first.
Then enter the “Operation Mode” Tab page.
Click the drop menu “Operation Mode” and select “Streaming Presentation”.
The reader will enter the streaming presentation mode immediately.
Presentation Mode
Presentation Mode uses ambient light and reader illumination to detect barcodes.
When in Presentation Mode, the LEDs remain dim until a barcode is presented to the
reader, then the aimer turns on and the LEDs turn on to read the code. If the light
level in the room is not high enough, Presentation Mode may not work properly.
To configure the reader to work in this mode, open the DataMax
®
Configuration
Program and Connect to the specific device first.
Then enter the “Operation Mode” Tab page.
Click the drop menu “Operation Mode” and select “Presentation”.
The reader will enter the Presentation mode immediately.

Honeywell HF800 Series Specifications

General

Brand	Honeywell
Model	HF800 Series
Category	Barcode Reader
Language	English