Stacked Symbologies
Enable/Disable all Stacked symbologies
Open DataMax
®
Configuration Program and connect the device first.
Go to the tab page “Symbologies” and click the “Stacked Linear” sub page.
Check the check box “Check All” will enable all the Stacked symbologies present in
the list.
Uncheck it will disable all the Stacked symbologies present in the list.
PDF417
Click the “PDF417” in the left list then all its related parameters will be shown on the
right.
Redundant times: output the decode result only when got identical barcodes
information for specific times.
Minimum Length: output the decode result when the symbology length equal or
larger than the minimum length.
Maximum Length: output the decode result when the symbology length equal or
shorter than the maximum length.
Macro PDF417: MacroPDF417 is an implementation of PDF417 capable of encoding
very large amounts of data into multiple PDF417 bar codes. When this selection is
enabled,these multiple bar codes are assembled into a single data string.
To Next Page
Loading...
Need help?
General
