Honeywell HF800 Series User Manual

40
4. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
5. Select "Use the following IP address" and enter the IP address, Subnet
Mask, Default Gateway. and DNS server. Click OK and close the Local Area
Connection properties window. (Reader default IP address is 192.168.1.110, so
make user your PC IP address and reader IP address are in the same network
segment)

Honeywell HF800 Series Specifications

General

Brand	Honeywell
Model	HF800 Series
Category	Barcode Reader
Language	English