Settings
73
1. Click and select Alarms.
Figure 6-63 Alarm List
The upper-right corner of the Alarms tab displays the following options:
Filter: The filter option enables to filter through the list of alarms based on:
• Entities: Controllers, Cameras, Doors, and Rules.
• Time: View Archived Events, Today, Yesterday, and Custom.
• Events: Access, Video and Intrusion.
• Sites: You can select and search the site.
Actions: Enables you to perform the following for the alarms that appear in the Alarm
window.
• Freeze Alarm Stream: Stop receiving new or unacknowledged alarms in the new
window. You can click this command again to start receiving the alarms. This feature
is useful when the Alarm window contains many unacknowledged alarms and it
becomes difficult to mange them. You can stop receiving the alarms momentarily
and start receiving again when needed.
• Acknowledge: Acknowledge the selected alarm. It enables you to acknowledge an
alarm to accept that the necessary response action is being taken.
• Archive: Clear the alarms when they are acknowledged.
To Next Page
Loading...
Need help?
General
